Salisbury Train Crash: Investigation update 

Details from the independent investigation into the train crash at Salisbury Tunnel Junction on 31st October have been published today by the Rail Accident Investigation Branch (RAIB).

The findings confirm that at around 18:45 hrs on 31st October 2021, a South Western Railway (SWR) passenger service from London Waterloo to Honiton (1L53), collided with the side of the Great Western Railway (GWR) passenger service from Portsmouth Harbour to Bristol Temple Meads (1F30).

The collision took place at Salisbury Tunnel Junction, which is on the immediate approach to Fisherton Tunnel, near Salisbury in Wiltshire.

At this junction, the Up and Down Dean lines which lead to and from Eastleigh merge with the Up and Down Main lines which lead to and from Basingstoke. 

At the time of the accident, the South Western Railway train was using the junction to join the Down Main line from the Down Dean line, while the Great Western Railway train was approaching the junction on the Down Main line from the direction of Basingstoke.

The impact of the collision caused the front two coaches of the SWR and the rear two coaches of train GWR to derail. Following the collision, both trains continued some distance into Fisherton tunnel before they came to a stop.

13 passengers and one member of railway staff required treatment in hospital as a result of the accident, which also caused significant damage to the trains and railway infrastructure involved.

Preliminary examinations from the RAIB has found that the movement of the GWR train across the junction was being protected from trains approaching on the Down Main line by signal SY31, which was at danger (displaying a red aspect). The SWR train passed this signal, while it was at danger, by around 220 metres, immediately prior to the collision occurring.

The report reads, “Preliminary analysis of data downloaded from the On Train Data Recorder (OTDR) fitted to train 1L53 shows that the driver initially applied service braking to slow the train on approach to the caution signal before signal SY31. Around 12 seconds after service braking started, the driver made an emergency brake demand. As the train approached signal SY31, and with the emergency brake still being demanded by the driver, a second emergency brake demand was made by the train protection and warning system (TPWS). 

“These emergency brake demands did not prevent the train from reaching the junction, where the collision occurred. OTDR analysis indicates that wheel slide was present both when the driver applied service braking and after emergency braking was demanded. This was almost certainly a result of low adhesion between the train’s wheels and the rails”. 

The report continues, “Our investigation will seek to identify the sequence of events which led to the accident. It will also consider:

"Our investigation is independent of any investigation by the railway industry, the British Transport Police or by the industry’s regulator, the Office of Rail and Road".